NASA Shifts Next Orbital Sciences Station Cargo Flight to Nighttime in June

Orbital Sciences Antares rocket and Cygnus resupply ship soar to space on Jan. 9, 2014 from NASA Wallops on Virginia coast on the Orb-1 mission to the ISS.  Antares next launch is slated for mid June 2014. Photo taken by remote camera at launch pad. Credit: Ken Kremer - kenkremer.com
Orbital Sciences Antares rocket and Cygnus resupply ship soar to space on Jan. 9, 2014, from NASA Wallops on Virginia coast on the Orb-1 mission to the ISS. Antares next launch is slated for mid-June 2014. Photo taken by remote camera at launch pad. Credit: Ken Kremer – kenkremer.com

Orbital Sciences has reset the launch of their next unmanned Cygnus resupply mission to the International Space Station (ISS) to early June, under guidance from NASA, after the long-postponed SpaceX Dragon cargo carrier successfully lifted off last week on April 18 and berthed at the orbiting outpost days ago.

Since both the Cygnus and Dragon vehicles dock at the same Earth-facing port on the stations Harmony node, one ship must leave before the other can arrive.

This flight was originally scheduled for an afternoon liftoff an early as May 6, but was postponed due to the continuing launch delays for the SpaceX CRS-3 mission from Cape Canaveral, Fla.

Further complicating the launch situation and limiting the available days for spaceship dockings are the normal, upcoming station crew rotations in Soyuz capsules in May and the “solar beta cutouts” in early June.

Therefore accounting for these restrictions, the earliest available launch opportunity for Cygnus on the Orbital-2 (Orb-2) mission is now no earlier than (NET) June 9.

Notably, a June 9 liftoff of the two-stage Antares rocket carrying Cygnusif it occurswould result in the first-ever nighttime launch of the booster from the beachside pad at the Mid-Atlantic Regional Spaceport (MARS) on NASA’s Wallops Flight Facility along Virginia’s eastern shore (at about 2 a.m.).

The maiden nighttime blastoff of Antares is certain to put on a spectacular sky show for tens of millions of U.S. East Coast residentsmuch as the launch of NASA’s LADEE lunar probe did last Fall in September 2013weather permitting of course.

While awaiting the SpaceX launch, Orbital and NASA have already completed numerous Antares/Cygnus prelaunch processing operations.

About two-thirds of Cygnus’ approximately 1650 kg of planned NASA cargo has already been loaded by the team. This marks a substantial increase over the 1260 kg lofted on the Orb-1 mission in January 2014.

Cygnus Orb-1 pressurized cargo module – side view – during prelaunch processing by Orbital Sciences at NASA Wallops, VA. observed during exclusive visit by Ken Kremer.  Cygnus Orb-2 module will be loaded with 1650 kilograms of cargo.  Credit: Ken Kremer – kenkremer.com
Cygnus Orb-1 pressurized cargo module–side view–during prelaunch processing by Orbital Sciences at NASA Wallops, Va., observed during an exclusive visit by Ken Kremer. Cygnus Orb-2 module will be loaded with 1650 kilograms of cargo. Credit: Ken Kremer – kenkremer.com

The remaining science and logistics late stow cargo, some of which is fragile and time sensitive, will be loaded shortly before the vessel is encapsulated inside the Antares payload fairing at Wallops Horizontal Integration Facility.

In addition to NASA science experiments, spare parts, food, water, and clothing, a competed series of student science experiments sponsored by the National Center for Earth and Space Science Education (NCESSE) is also flying aboard.

Further Cygnus processing is ongoing in anticipation of a June launch.

The integrated spacecraft, comprising the pressurized and service modules, were combined and are being fueled and readied for mounting on the ATK-built solid-fueled upper stage.

Antares Orb-1 rocket 1st and 2nd stages undergoe processing at the Horizontal Integration Facility at NASA Wallops, Virginia, during exclusive visit by  Ken Kremer.   Credit: Ken Kremer - kenkremer.com
Antares Orb-1 rocket 1st and 2nd stages undergoe processing at the Horizontal Integration Facility at NASA Wallops, Va., during an exclusive visit by Ken Kremer. Credit: Ken Kremer – kenkremer.com

Also, the Flight Readiness Certification Review (FRCR) was completed on April 15 to insure that the spacecraft and rocket are ready when called upon.

The Orbital-2 Cygnus spaceship is conducting the second of eight operational cargo logistics flights scheduled under Orbital Sciences’ multi-year $1.9 Billion Commercial Resupply Services contract (CRS) with NASA that runs through 2016.

The purpose of the unmanned Cygnus spaceshipand the SpaceX Dragonis to restore America’s cargo-to-orbit capability that was terminated following the forced shutdown of NASA’s space shuttles.

Cygnus and Dragon will each deliver 20,000 kg (44,000 pounds) of cargo to the station, according to the NASA CRS contracts.

The Orb-2 launch follows a trio of successful Antares launches: two in 2013, including the initial test launch in April and the 1st demonstration launch to the ISS in September, and the Orb-1 launch at the start of this year on Jan. 9.

Space journalists Ken Kremer, Mike Killian  and Alan Walters  of AmericaSpace setting remote cameras at Antares launch pad amidst bone chilling cold for Jan. 9, 2014 blastoff on the Orb-1 mission to the ISS from NASA Wallops, VA.  Credit: Ken Kremer - kenkremer.com
Space journalists Ken Kremer, Mike Killian, and Alan Walters of AmericaSpace setting remote cameras at Antares launch pad amidst bone chilling cold for Jan. 9, 2014, blastoff on the Orb-1 mission to the ISS from NASA Wallops, Va. Credit: Ken Kremer – kenkremer.com

Cygnus would reach the station after a carefully choreographed series of thruster engine burns over about 2.5 days to raise its orbit.

Astronauts will then grapple Cygnus with the stations Canadian built robotic arm and attach to the vacant port on the Harmony node.

It is scheduled to remain berthed at the ISS for about 40 days of unloading and reloading.

The Cygnus PCM is manufactured by Thales Alenia Space at their production facility in Turin, Italy, under a subcontract from Orbital.

The design is based on the Multi Purpose Logistic Module (MPLM) space shuttle cargo transporter. The standard version has an internal volume of 18.9 cubic meters and can carry a total cargo mass of 2000 kg.

Ken Kremer

Want to keep up-to-date with all things space? Be sure to “Like” AmericaSpace on Facebook and follow us on Twitter: @AmericaSpace

Missions » ISS » COTS » CYGNUS » Missions » ISS » COTS » CRS-3 »

‘Repairing Hubble’ Showcases Space Telescope’s Components on Anniversary

To the Brink, From the Brink: Happy 24th Birthday, Hubble (Part 2)