NASA Announces Payloads for First SLS Mission

An SLS in its Block 1 configuration goes up, up, and away in this artist’s rendering. Image Credit: NASA/MSFC

It may still be almost three years into the future, but the maiden voyage of NASA’s gigantic Space Launch System (SLS) booster—destined to carry humans beyond low-Earth orbit for the first time in five decades—drew […]

First SLS Work Platform Installed in KSC's Vehicle Assembly Building High Bay 3

From NASA: "Inside the Vehicle Assembly Building at NASA's Kennedy Space Center in Florida, the 325-ton crane lifts the first half of the K-level work platforms up for installation in High Bay 3 on Dec. 22. The platform will be secured into position on tower E, about 86 feet above the floor." Photo Credit: NASA/Glen Benson

From NASA: “Inside the Vehicle Assembly Building at NASA’s Kennedy Space Center in Florida, the 325-ton crane lifts the first half of the K-level work platforms up for installation in High Bay 3 on Dec. 22. The platform will be secured into position on tower E, about 86 feet above the floor.” Photo Credit: […]

NASA Contracts With Aerojet Rocketdyne to Restart RS-25 Engine Production for SLS

Four RS-25D engines will power the core stage of NASA's Space Launch System (SLS). Image Credit: Aerojet Rocketdyne

The opening salvo of four Space Launch System (SLS) flights, beginning with Exploration Mission (EM)-1 in November 2018, will contain a core stage powered by four clustered RS-25D engines. Image Credit: NASA

More than four years since three of its kind were last fired in anger, on 8 July 2011, to deliver Atlantis’ STS-135 […]

Lockheed Martin Moves Into Full-Scale Assembly of NASA's SLS EM-1 Orion Spacecraft

The aft bulkhead for the Exploration Mission (EM)-1 spacecraft welded to the barrel of the Orion pressure vessel at the Michoud Assembly Facility in New Orleans, Louisiana. Photo Credit: NASA / Radislav Sinyak

Just six weeks shy of the one-year anniversary of the triumphant maiden voyage of the Orion Multi-Purpose Crew Vehicle (MPCV)—which saw […]

Capping A Milestone Year, NASA Announces Completion of SLS Critical Design Review

From NASA: "For the first time in almost 40 years, a NASA human-rated rocket has completed all steps needed to clear a critical design review (CDR). The agency’s Space Launch System (SLS) is the first vehicle designed to meet the challenges of the journey to Mars and the first exploration class rocket since the Saturn V." Image Credit: NASA/MSFC

From NASA: “For the first time in almost 40 years, a NASA human-rated rocket has completed all steps needed to clear a critical design review (CDR). The agency’s Space Launch System (SLS) is the first vehicle designed to meet the challenges of the journey to Mars and the first exploration class rocket since the […]

Astronauts Practice Orion Crew Recovery as Aerojet Completes Major Subsystems Review for EM-1 Spacecraft

Engineers participate in testing to evaluate procedures to recover crews from Orion after splashdown in the Pacific Ocean on future missions. The training took place at the Neutral Buoyancy Laboratory at NASA’s Johnson Space Center in Houston. Caption and Credit: NASA

Engineers participate in testing to evaluate procedures to recover crews from Orion after splashdown in the Pacific Ocean on future missions. The training took place at the Neutral Buoyancy Laboratory at NASA’s Johnson Space Center in Houston. Caption and Credit: NASA

After spending a long period of time traveling in the vacuum of space, […]

NASA Makes Improvements to Orion Heat Shield With Data Gathered From EFT-1

A manufacturing development unit of Orion’s heat shield is being built at Lockheed Martin’s facility in Denver. Engineers are using the unit to verify the new heat shield manufacturing process before it is used on actual flight hardware. Photo and Caption Credit: Lockheed Martin

A manufacturing development unit of Orion’s heat shield is being built at Lockheed Martin’s facility in Denver. Engineers are using the unit to verify the new heat shield manufacturing process before it is used on actual flight hardware. Photo and Caption Credit: Lockheed Martin

Engineers working on NASA’s Orion capsule are taking a different […]

NASA to Test Orion's European Service Module Starting This Summer

From ESA: "Proposal for a Multi-Purpose Crew Vehicle-Service Module (MPCV-SM)." Orion's European service module will fly on Exploration Mission-1 (EM-1) in late 2018. Image Credit: ESA-D. Ducros

From ESA: “Proposal for a Multi-Purpose Crew Vehicle-Service Module (MPCV-SM).” Orion’s European service module will fly on Exploration Mission-1 (EM-1) in late 2018. Image Credit: ESA-D. Ducros

NASA continues to ramp up its development of its newest crewed space vehicle and launch system, the Orion Multi-Purpose Crew Vehicle (MPCV), which will be powered by […]

Critical Year for SLS Development Continues With Base Heating Tests

From NASA: “A two-percent scale model of the Space Launch System core stage RS-25 engines, in the pictures at left, and a model of the SLS without the twin boosters is used for nominal, core-stage-only testing at CUBRC Inc. in Buffalo, New York.” Image Credit: NASA/MSFC

NASA is taking further steps bringing the agency […]

The Year in Space, 2014: New Beginnings, Continuing Discoveries

LIFTOFF! NASA’s Orion spacecraft begins its debut voyage at the dawn of Friday, Dec. 5. Orion’s successful Exploration Flight Test 1 (EFT-1) capped an exciting year in spaceflight. Photo Credit: John Studwell / AmericaSpace

As 2014 winds down to its end, this year can be remembered for its new beginnings in spaceflight, encompassing the […]